Features
- Made with grey insect mesh that is 18×16 gauge.
- The aluminium frame is powder coated in white and has mitred corners. Comes with a brush pile seal.
- A midbar may be used to provide additional support for larger screens.
- Comes ready made for you to fit.
Measuring – click here Aluminium Fixed or Hinged Window – Commercial v24 or read below…
Measure the width and height of the aperture, plus any bevelled edges on the window frame. Allow space for window handles and fittings which need to fit within the frame of the screen.
Add 28mm of flat surface on each side (for the screen frame to rest against). If you are short of flat surface, you can have as little as 10mm, but the frame will overlap some of the aperture. These will be the outer dimension of the screen frame.
We manufacture to the sizes given to us, subject to +/- 2mm manufacturing tolerance. Please ensure you have read our measuring instructions carefully and made any deductions required.
Width: Aperture (and bevelled edges) + 56mm of flat surface.
Height: Aperture (and bevelled edges) + 56mm of flat surface.
Additionally
Ensure you have an additional 17mm of flat surface to fit hinges and 13mm to fit the magnetic catch – do not include these amounts in the manufacturing measurements you give us.
Do you need to build a sub frame?
If the window handle extends beyond the flat surface you will need to build a sub frame around the window to bring the screen away from the window handle when it is closed.
