Aluminium Window Screen – Top Hinged

This aluminium window screen is top hinged to make it easier to open and close your window while keeping those pesky flying insects out. Suitable for internal or external use, it can be fitted to an existing frame, a subframe or directly on the wall.  Check out the additional information below.

The maximum size for this screen is 1500mm wide x 1000mm high or 1000mm wide x 1500mm high.

If you would like a quotation, please send us an email to sales@flyscreen.com with the following details –
  • The type of screen you would like.
  • Your measurements in mm (width x height).*
  • Your address – this helps us estimate carriage and how long for delivery.

*Please read the measuring instructions below thoroughly.

We will get back to you as soon as we can with a price, lead time and what you can expect from your screen.


This is also available as a DIY Kit – check it out here.



  • Made with grey insect mesh that is 18×16 gauge.
  • The aluminium frame is powder coated in white.
  • A midbar may be used to provide additional support for larger screens.
  • Comes ready made for you to fit.


Measure width and height of the aperture, plus any bevelled edges on the window frame. Add 25mm of flat surface on each side (for the screen frame to rest against). If you are short of flat surface, you can have as little as 10mm, but the frame will overlap some of the aperture.
Any locating wedge for a cockspur handle must be included in the aperture measurement, and there must be at least 25mm of flat surface beyond it.
We manufacture to the sizes given to us, subject to +/- 2mm manufacturing tolerance. Please ensure you have read our measuring instructions carefully and made any deductions required.

Width: Aperture (and bevelled edges) + 50mm of flat surface.
Height: Aperture (and bevelled edges) + 50mm of flat surface.


Ensure you have an additional 10mm of flat surface to fit hinges and 20mm to fit turn buttons – do not include these amounts in the manufacturing measurements you supply us.

Do you need to build a sub frame ?

If the window handle extends more than 10mm beyond the flat surface you will need to build a sub frame around the window to bring the screen away from the window handle when it is closed. Alternatively let the screen rest against the handle (hinged screen), or lift it down (lift-out screen). Or see our Stand Off Window screen which has a 35mm clearance.

Shopping Basket