Roller Door Screen – Wind Resistant Range – Side Mounted

This wind resistant roller is great if you live in windy areas. With a fully retractable insect screen, it is pulled into place using a handle on the profile that is held in place using a magnetic strip. Available for a single door or a double door where the rollers meet in the middle. Check out the details below for more information.

The maximum size for a single door is 1600mm wide x 2400mm high. For double doors the maximum size is 3000mm x 2400mm.

If you would like a quotation, please send us an email to [email protected] with the following details –
  • The type of screen you would like.
  • Your measurements in mm (width x height).*
  • Whether you would like a single or double door.
  • Your address – this helps us estimate carriage and how long for delivery.

*Please read the measuring instructions below thoroughly.

We will get back to you as soon as we can with a price, lead time and what you can expect from your screen.



  • Can be reveal fitted either inside or out, depending on which way your door opens.
  • The maximum size for this screen is:
        • Single – 1600mm wide x 2400mm high
        • Double – 3000mm wide x 2400mm high
  • Grey fibreglass mesh, 18×16 gauge, and white powder coated aluminium cassette and tracks.
  • Mad to measure so it arrives ready for use.

Measuring for Reveal Fit

Measure the minimum width of the aperture; we suggest you take three measurements – top, middle and bottom. Deduct 2mm from the smallest measurement.

Measure the minimum height of the aperture, again we suggest you take three measurements – left, middle and right. Deduct 2mm from the smallest measurement.

We manufacture to the sizes given to us, subject to +/- 2mm manufacturing tolerance. Please ensure you have read our measuring instructions carefully and made any deductions required.

Width: Smallest width of reveal – 2mm.
Height: Smallest height of reveal – 2mm.

Shopping Basket