,

Roller Door Screen – Wind Resistant Range – Top Mounted

This wind resistant roller is great if you live in windy areas. With a fully retractable insect screen, it can be pulled into place using either a handle or chain. It is ideal for doorways as there is no bottom rail needed and therefore less tripping hazards! Check out the details below for more information.

The maximum size for this screen is 2000mm wide x 2480mm high.  The minimum width is 520mm.

If you would like a quotation, please send us an email to sales@flyscreen.com with the following details –
  • The type of screen you would like.
  • Your measurements in mm (width x height).*
  • Fitting Choice – Reveal Fit, Face fit to wall within reveal or Face Fit to wall outside the reveal.
      • If fitting externally but operating from inside, please specify when emailing.
  • Your address – this helps us estimate carriage and how long for delivery.

*Please read the measuring instructions below thoroughly.

We will get back to you as soon as we can with a price, lead time and what you can expect from your screen.

 

SKU: ROLLER_WR_MTM_DOOR_TOP Categories: , Tags: , , , , ,

Features

  • Can be face or reveal fitted.
  • Suitable for internal or external fitting.
  • The screen can be operate by either a handle or chain and locks into position.
  • The maximum size for this screen is 2000 wide x 2480mm high.
  • Grey fibreglass mesh, 18×16 gauge, and white powder coated aluminium cassette and tracks.
  • Mad to measure so it arrives ready for use.

Measuring for Reveal Fit

Screens will be fitted within the reveal by screw-fixing the end caps and side tracks sideways into the reveal.

Measure the minimum width of the reveal; we suggest you take three measurements – top, middle and bottom. Deduct 2mm from the smallest measurement.

Measure the minimum height of the reveal, again we suggest you take three measurements – left, middle and right. Deduct 2mm from the smallest measurement.

We manufacture to the sizes given to us, subject to +/- 2mm manufacturing tolerance. Please ensure you have read our measuring instructions carefully and made any deductions required.

Width: Smallest width of reveal – 2mm.
Height: Smallest height of reveal – 2mm.

Face Fit

Screens will be fitted the frame or fitting surface by screw-fixing the side tracks through the face of the tracks. The width of the cassette is the critical measurement – it cannot be changed after it has been made.

Measure the width of the aperture, plus any bevelled edges on the window frame. Add 40mm of flat surface on each side to fit the tracks.

Measure the height of the aperture, plus any bevelled edges on the window frame. Add 50mm flat surface for the cassette to fit to. The bottom bar needs to close below the start of the flat surface to provide a seal, so add a minimum of 10mm of flat surface at the bottom, more can be added if space allows.

If fitting to the wall outside the reveal, we suggest you add an additional 20mm of flat surface on each side and at the top, to avoid fixing too close to the edge of the reveal.

We manufacture to the sizes given to us, subject to +/- 2mm manufacturing tolerance. Please ensure you have read our measuring instructions carefully and made any deductions required.

Width: Aperture  + 80mm of flat surface.
Height: Aperture (and bevelled edges) + 60 of flat surface.

Related products

Shopping Basket