Features
- Can be face or reveal fitted onto window frames, sub-frames or the wall outside the reveal or within the window aperture.
- The screen can be operate by either a handle or chain and locks into position.
- The maximum size for this screen is 2000mm wide x 2480mm high.
- Grey fibreglass mesh, 18×16 gauge, and white powder coated aluminium cassette and tracks.
- Mad to measure so it arrives ready for use.
Click here Roller Window Door Screen WR TopMount v24 for measuring instructions or read below….
Measuring for Reveal Fit
Measure the minimum width of the reveal; we suggest you take three measurements – top, middle and bottom. Deduct 2mm from the smallest measurement.
Measure the minimum height of the reveal, again we suggest you take three measurements – left, middle and right. Deduct 2mm from the smallest measurement.
We manufacture to the sizes given to us, subject to +/- 2mm manufacturing tolerance. Please ensure you have read our measuring instructions carefully and made any deductions required.
Width: Smallest width of reveal less 2mm.
Height: Smallest height of reveal less 2mm.
Face Fit
The width of the cassette is the critical measurement – it cannot be changed after it has been made.
Measure the width of the aperture, plus any bevelled edges on the window frame. Add 40mm of flat surface on each side to fit the tracks.
Measure the height of the aperture, plus any bevelled edges on the window frame. Add 50mm flat surface for the cassette to fit to. The bottom bar needs to close below the start of the flat surface to provide a seal, so add a minimum of 10mm of flat surface at the bottom, more can be added if space allows.
If fitting to the wall outside the reveal, we suggest you add an additional 20mm of flat surface on each side and at the top, to avoid fixing too close to the edge of the reveal.
We manufacture to the sizes given to us, subject to +/- 2mm manufacturing tolerance. Please ensure you have read our measuring instructions carefully and made any deductions required.
Width: Aperture + 80mm of flat surface.
Height: Aperture (and bevelled edges) + 60mm of flat surface.
